In the daily operation process of the personnel of the electrical complete equipment company, is there any danger in improper operation? The answer is yes, because the work level of the guardians is not high, they are not familiar with the on-site operation process, and can not play the role of the guardians. Often due to the guardian's own failure to correctly analyze the potential safety hazards in the work, it is unable to make a correct judgment on the actual operation of the operator, resulting in the role of guardianship becoming mere formality, losing its due significance, and increasing the risk factor in the work.

習慣性違章無處不在，這都是經過長期生活和工作養成的壞習慣，短時間內不容易改變。根據近幾年電力系統典型事故統計分析，電力系統80%以上的人身傷亡事故是由習慣性違章造成的?？梢姲?全意識淡薄，無意識的習慣性違章危害很大，既危害企業，也危害職工個人和家庭。

Habitual violations are everywhere, which are bad habits formed through long-term life and work, and are not easy to change in a short time. According to the statistical analysis of typical accidents in power system in recent years, more than 80% of the casualties in power system are caused by habitual violation of regulations. It can be seen that the safety awareness is weak, and the unconscious Habitual Violation of rules and regulations does great harm to both the enterprise and the employees and their families.
                      

那么這種電氣成套設備廠中的日常操作性的損失我們需要如何避免呢？

So how can we avoid the loss of daily operation in the electrical equipment factory?

對于每次復雜的操作，一定要開展操作準備會，針對倒閘操作易發生誤操作環節做好預防措施，做到危險點清楚并制定完善的預控措施。班組長要深入了解本班組人員的思想動態，如發現班組人員思想有異常，可靈活地調整當值操作人員，確保操作順利。

For each complex operation, we must carry out the operation preparation meeting, take preventive measures for the misoperation link of switching operation, make the danger point clear and formulate perfect pre control measures. The team leader should deeply understand the ideological trends of the team members. If the team members have abnormal thoughts, they can flexibly adjust the operators on duty to ensure smooth operation.

盡量避免在下列情況下進行大型、復雜的操作：值班人員在交接班時；電網發生事故時；電網運行方式發生不正常時；遇雷雨、大風等惡劣氣候時。假如：當操作人員在操作過程無法按時進行交接班時，必須操作告一段落后再進行交接班，但雙方必須認真做好交接工作。電氣成套設備公司交班方應向接班方交代清楚運行接線以及操作任務狀態、未操作內容；接班方應根據交班方提供的設備操作狀況，詳細檢查設備的狀態，并核對設備的名稱編號后，對未完成的操作內容進行繼續操作。

Try to avoid large and complex operations under the following circumstances: when on duty personnel are on shift; In case of Power Grid Accident; When the operation mode of power grid is abnormal; In case of thunderstorm, gale and other bad weather. If: when the operator in the operation process can not be on time for the shift, must be behind the operation for a period of time to carry out the shift, but both sides must seriously do a good job in the handover work. The handover Party of the electrical complete equipment company shall explain clearly the operation wiring, operation task status and non operation contents to the successor; The successor shall check the status of the equipment in detail according to the operation condition of the equipment provided by the handover party, and continue to operate the unfinished operation after checking the name and number of the equipment.

本文由電氣成套設備廠家http://bjfrp.com整理提供，感謝您的閱讀，希望以上內容對大家有所幫助!

This paper is written by the manufacturer of complete electrical equipment http://bjfrp.com Thank you for your reading. I hope the above content can help you!